Follow the below robust troubleshooting procedure step-by-step and do not skip any steps.Failure to follow this guide when asked by eth OS or gpu Shack staff (as part of RMA procedure) will result in a voided warranty, as described in the gpu Shack Warranty Agreement.Some Dell notebook computers need to have at least 10% battery charge before you begin the BIOS update.Note: Occasionally you will need to install a previous version before updating to the latest version.It is recommended to assign static IPs based on mac addresses on your router.However, you can also set a static IP on linux itself: eth OS automatically assigns a 6-character panel ID based on a hash of your external IP address.
If the issue persists, continue with the below guides: Example: You suspect that your motherboard is faulty.
We recommend that you record the original BIOS settings before you modify them.
A Basic Input/Output System (BIOS) update is a software utility that updates the programming of the most basic hardware in your computer.
Remove the motherboard from power and disconnect it from your rig. After that, plug the CMOS battery back in and follow these guides: Booting a Rig without a Power Button and Initial Setup.
If the issue is unresolved, proceed with the below guides: IF YOU SUSPECT THAT YOUR MOTHERBOARD IS FAULTY, DO NOT SWAP IN OTHER COMPONENTS INTO THE NON-WORKING RIG IN THE HOPES THAT IT WILL WORK, SWAP YOUR MOTHERBOARD INTO ANOTHER WORKING RIG!