Updating modem

If you are uncertain how to update the firmware, contact the manufacturer of the device.

You should know the device model number and revision (if applicable), which might be printed on a label on the device itself.

This IP address is almost always a Private IP address which is usually accessed from inside your home network.

This helps prevent outsiders from attempting to administer your router.

If you don’t update your firmware then you won’t be able to take advantage of any speed boosting upgrades that your router manufacturer might release in an update.

Every router is different, but usually, they have a similar process for upgrading the router’s firmware.

These credentials can likely be obtained from your router manufacturer’s website or they might be located on a label on the bottom or back of your router, typically located near the serial number of the router.

Usually, there is a dedicated firmware upgrade section within the router administration site.

Newer routers will likely make it very easy to download and install the firmware directly from within the router administrative console.Apple makes no representations regarding third-party website accuracy or reliability. I purchased a new battery and it still does not work. It has been about a month and I cant seem to figure this out.Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement.Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Other company and product names may be trademarks of their respective owners.