Can relative dating always be used Xxxchatt

You might consider referring to magazine ( a great and helpful resource for those who buy, sell and trade vintage instruments.You might also consider consulting one or more of the many instrument dealers who offer appraisals of vintage instruments, such as Elderly Instruments ( Gruhn Guitars ( Mandolin Bros. The following six digits are the unit identifier, although it should be noted that these final six numbers are not sequential and do not provide any other identification information about the instrument. S.-made Fender instruments, with exceptions including the American Vintage series and certain special-run instruments.“10” prefix followed by a space and seven digits (late 2009 through March 2010)US10 6 digits (beginning in about March 2010) V 5 or 6 digits (American Vintage Series except ’52 Telecaster, which uses a five-digit number stamped into the bridge plate) A limited number of these "H", "I" and "K" series guitars were made in '89 and '90.Neck-dating can be useful in determining the was produced, rather than the complete instrument.Given the modular nature of Fender production techniques, an individual neck may have been produced in a given year, then stored for a period of time before being paired with a body to create a complete guitar, perhaps, for example, in the following year.Serial numbers with an “S” prefix denote the 1970s (signifying a CBS attempt to use serial numbers to identify production years); an “E” prefix was introduced in 1979 to denote the 1980s. Vintage Series instruments and “V”-prefix serial numbers. “N”-prefix serial numbers denoting the 1990s were introduced in 1990.

The only way to try to narrow the date range of your specific instrument is to remove the neck and check the butt end of the neck heel for a production date, which may be stamped or written there (if you’re uncomfortable doing this yourself, please refer to an experienced professional guitar tech in your area). Serial numbering didn’t change immediately because instruments continued to be made using existing, tooling, parts and serial number schemes.

These markets operate completely independent of the new-instrument market.

If, however, you’re interested in determining a relative value for your instrument(s), we recommend that you contact used or vintage instrument dealers in your area.

Once again, there is quite a bit of overlap in numbers and years.

The only way to try to narrow the date range of your specific instrument is to remove the neck and check the butt end of the neck heel for a production date, which may be stamped or written there (if you’re uncomfortable doing this yourself, please refer to an experienced professional guitar tech in your area). instruments with “V”-prefix serial numbers is to remove the neck and check the butt end of the neck heel for a production date, which may be stamped or written there.

Can relative dating always be used